Tuesday, August 20, 2019

Risk Identification In Water Treatment Plant Projects Construction Essay

Risk Identification In Water Treatment Plant Projects Construction Essay Projects can fail for a number of reasons and the risks are always high. All project, program, and portfolio are subject to risk, whether positive or negative risks. The aim is to decrease negative risks and enhance positive risks. Managing risks is one of the most important tasks for the construction industry as it directly affects project outcomes. Unfortunately, many organizations do not realize that there is a need to include risk management as a key element to success in business. Hence, some organizations delegate the risk management tasks leaving to someone to needs to plan, identify, assess, develop response plans, and control risks or do just part/ parts of the risk processes. It is not integrated into their project management philosophy. Project risk management has been intensively discussed in recent years. Projects are becoming shared efforts of multiple parties construction industry is a good example of an area, where the project outcome is delivered in an extremely complex actor network. This paper discuss identified the common and specific risks that may occur in the infrastructure projects specially in the water treatment plant projects in Egypt then we make initial assessment to these risks through a questionnaire was designed using the matrix method then we make analyzing of the responses of this questionnaire. Introduction This paper is focused only on the qualitative assessment of the risks. We use the matrix method for the assessment of these risks. Responses to the questionnaire were then collected and analyzed. The analysis included ranking the risks in terms of degree of occurrence (probability) (v.high, high, med, low, very low) the level of influences (impact) (v.high, high, med, low, very low) as the following matrices: A general water supply system is composed of water sources, raw water transmission pipes, water treatment plants, and water distribution networks. However, these components and subsystems give the greatest opportunities for both natural and human-related influences because most of them are spatially diverse and accessible. With respect to this, researchers have identified the potential vulnerable areas during the process of delivering water from the sources to the customers as (see Figure 1): (1) water sources (e.g., river, reservoir, and wells); (2) water treatment plant that removes impurities and harmful agents and makes water suitable for domestic consumption and other uses which consists of: Screen, Mixing tank, Flocculation basin, Settling tank, Sand filter, Disinfection (3) water distribution pipelines that deliver clean water on demand to homes, commercial establishments, and industries which consists of: pipes, pumps, junctions/nodes, fitting (4) storages (tanks water tower s); and (5) other facilities (transmission pipes, channels, pumps, valves, etc.).These vulnerable points are the focus of risk assessment. Figure 1 Elements and vulnerable points in a general water supply system QUANTITY REQUIREMENTS: Factors affecting used Consider the following factors affecting use ashore: * Water uses (domestic, industrial, fire protection) * Peak demands (all uses). * Other essential demands. * Missions of the activity. * Climatic effects. Water treatment plant Water treatment plant is the most important facility in a water supply system to remove contaminants in raw water, disinfect treated water, and produce drinkable water to consumers. However, hazards may be introduced during the process of treatment, or hazardous circumstances may allow contaminants to pass through treatment in significant concentrations. Constituents of drinkable water can be introduced through the treatment process, including chemical additives used in the treatment process or products in contact with water. Furthermore, suboptimal filtration following filter backwashing can lead to the introduction of pathogens into the distribution system. Three attributes are crucial to water users: * There must be adequate quantities of water on demand. * It must be delivered at sufficient pressure. * It must be safe to use. In our paper we will focus on the Water treatment plant in the water supply system which considers an important part in the water supply system. We will discuss the risks may occur in the projects we will make an initial assessment to these risks but at the beginning we will give overview of risk management in the construction projects specially the infrastructure projects which owned by the government, we will discuss the risks from the view of contractor. Research methodology A questionnaire was designed for assessment for all possible risks that may occur in the water treatment plant projects in EGYPT which some of these risks are general risks that may happen in all infrastructure projects and some are specific risks for the water treatment plant projects through the construction operation phase as discussed previous in the stage of risks identification then forward to some of managers in. This paper is focused only on the qualitative assessment of the risks. We use the matrix method for the assessment of these risks. Responses to the questionnaire were then collected and analyzed. The analysis included ranking the risks in terms of degree of occurrence (probability) (v. high, high, med, low, very low) the level of influences (impact) (v. high, high, med, low, very low) as the following matrices: 1- Identification of risks Categories of risks for infrastructure and service delivery projects: 1-Political risks: Political risks are the first category of risks identified. It contains all the risks of government actions that may endanger a project. 1-1 Political support risks: Host government support is essential for any infrastructure projects (ex: government support for the owner disputes on land) 1-2 Taxation risks: Taxation risks mat raises of tax rate, or applied new tax tariffs, which, may lead to decrease the promoter profit and unbalanced project cash flow. 1-3 Import/export restrictions risk: The import and export restriction risk covers the legislation changes, which arrange the import of the equipment. 1-4 Failure to obtain approvals. Failure to obtain approval risk occurs when the central or local government authority does not approve the project-related issues in time or even cancels the ones already approved. Obtaining approvals for a project from complex web of government agencies and departments, from municipal to provincial to central government levels, can be extremely time-consuming process, delaying entire projects and hurting their financial viability. 2-Financial risks: The risk that the financiers will not provide or continue to provide funding to the project 2-1 Delayed Payment by the government: Payments on time are considered extremely important by the contractors maintain the cash flow and eliminate financial difficulties . Delayed payment will influence the financial situation of the contractor, especially if the due payment is substantial and or delayed for along time. 2-2 Changes in law regulation: Local authorities and government have specific codes and regulations that might be changed or revised from time to time. These regulations must be adhered to by contactors. But this has low probability to occurrence in our project because it is owned by the government. 2-3 Inflation risks: This risk category mainly depends on the economic conditions of the country. As the inflation increases this risk becomes more important. 2-4 Interest rate changes. 2-5 Devaluation risks. 2-6 Financial failure: Financial failure of any party (contractor or owner) wills significant impact the projects schedule and consequently the budget. This is more likely happen in big projects where the owner (government) might not have sufficient fund for the project or the contractor bids low on the project. 3- Development risks: Development risks describes the risk of the bidding procedures, which are very important part of the project, the bid evaluation criteria must be clearly defined and the bids must be evaluated in a public and objective manner, the chances for success are predictable. The competitive bidding systems usually lead to terms and conditions more favorable to the national interest. An orderly and transparent bidding procedure should also win public support for that project which can solve the problems that face the contractor such as land owner disputes. 3-1 Bidding risks: The bidding process in Egypt includes the following risks, which can face the contactor: contractor spend high cost for the preparation of the feasibility studies, investigation, design, planning and estimation of the project to be able to tender. Contractor warred about the risks of their innovative proposals being put out to competitive tender without gaining exclusivity or preferential treatment from other competitors. 3-2 Planning delay: The planning delay risks refer to the delay of the tender evaluation by the government officials whom responsible to do such task. 3-3 Approval risks: Delays in approval risk appear when the central of local government authority does not approve the project-related issues in time. Obtaining approvals for a project from complex web of government agencies and departments, from municipal to provincial to central government levels, can be extremely time-consuming process, delaying entire projects and hurting their financial viability. 3-4 Force majeure risk: Force majeure risk is the risk that a specified event entirely outside the control of either party will occur and will result in a delay or default by the contractor in the performance of its contractual obligations. for example cyclone, earthquake, outbreak of war. 4-Site risk: Site risk is the risk that the project land will be unavailable or unable to be used at the required time because of Land owner disputes that the site will generate unanticipated liabilities, with the result that the service delivery and revenues are adversely affected. 4-1 Site access: This risk category refers to the right of way and access to the project site. This an important category especially if the project is in a remote or undeveloped area or where access is limited to small trucks where large construction tools like big trucks and loaders cannot get into the project site. Also, this important when the project is located in a very congested area or access to other facilities and public areas need to be blocked or detoured in some stages of the project. 4-2 Statutory approvals. 4-3 Environmental issues 4-4 differing site condition: This is a clear risk category and could happen in most of construction projects. For instance the soil conditions changes and the contractor might face or hard soil during excavation instead of soft soil as the top layer at the site showed or as the tender document may have indicated. Another example is underground buried utility piping, power cables and high water table area. These types of differing site conditions occur mostly in renovation and /or expansion of existing projects where new construction interface with the existing structures. These differing site conditions will require extra efforts and may necessitate special equipment and tools for excavation and/or de-watering. 4-5 Suitability of the site and any existing infrastructure: Means existing of any underground infrastructures (e.g. sewage pipes) 5- Construction risks: Construction risks are the identified risk category which contains the risks faced the project during the construction phase which can be highly affect on the project cost and in turn the investment needs to complete the project. It can be endanger to the feasibility of the project. 5-1 Delay risks: Delay risk means delay in the construction time schedule which, can be occur due to poor project management applied or due to bad cost estimation, which lead to financial failure. 5-2 Cost overrun risks: Cost overrun risk occur when construction costs exceed original estimates, either due to inflation, non realistic cost estimation, excessive design changes or lack of risk management framework. 5-3 Re performance risk: Re performance risk is occurred due to reconstruct or maintains the bad work done by unqualified contractor. 5-4 Completion risk: Completion risk refers to the non-completion of the project due to effect of force majeure or unforeseen soil conditions. 5-5 Variation risks: A change in work is an important risk category in the construction projects. It could be change in work procedures, methodology o change of plans and scope of work. These changes might lead to change orders demolitions and re-working and must be considered in the assessments of risks because they affect the project budget, schedule, safety and quality. Normally changes in work result because of insufficient planning at the project definition stage or because of lack of clear scope and drawing detail or simply because the owner s desire to make changes to the project. 5-6 Loss or damage to work: Loss or damage to work risks rises by the unforeseen soil conditions or breakdown of equipment, which are common occurrences on any construction site, especially for large civil engineering projects. Usually, these will have repercussion on cost and time but the effects are usually surmountable with today s technology. 5-7 Force majeure risk: Force majeure risk is the risk that a specified event entirely outside the control of either party will occur and will result in a delay or default by the contractor in the performance of its contractual obligations during the construction period. For example, earthquake, outbreak of war. 5-8 Mistakes in installation of pipes. 5-9 Mistakes in installation valves of pipes. 5-10 The permeability of the reservoir during a test. 5-11 Labor equipment availability: This risk category is mainly related to the availability of some of the resources namely, labor, material and equipment. Certain jobs may require specific skilled expertise and /or special material and equipment that might not available or scarce in the local market and take a long time to procure. For example a skilled a qualified welder or special lifting and fitting of some heavy structure that may require crane capacity or piece of equipment that is not available in the local market may force the contractor to hire a certain skilled labor and import the special piece of the equipment or change the construction method to suit. This is more likely to happen in complex major projects or projects involving some degree of high technological complexity like water treatment plant project. 5-12 Labor equipment productivity: Like the previous risk category, certain jobs involving the productivity of labors and equipment might be affected because of the complexity of jobs or the nature of the work. if this not routine, then the labor and/or the equipment operator need to go through a learning curve. Another example that might affect labor and equipment productivity is the morale of the labor and the use of defective tools and equipment. 5-13 defective material: Material is essential resource for construction projects and there is need for quality control and quality assurance to eliminate material replacement and re-work. this risk category becomes more important for lump sum contracts if the specifications were not well defined. 5-14 labor disputes: This is more likely to happen in large companies where the work forces are multinationals who come from different countries with different background or where the relationships between management and workforce are tense. Usually any labor dispute is either resolved internally or by the local authorities and police. 5-15 Safety accident: Safety and accidents in construction projects can not overlooked, especially when the projects involves deep excavation or high elevation construction. The risk category is inherited in the construction industry but can be minimized by following safety rules and the use of safety equipment such as goggles, safety hats and shoes. 5-16 Coordination with sub. Contractor: Coordination with sub-contractors and material suppliers is an important task especially in a multi-player environment like big construction projects. Beside it could be risky if not kept smooth, in a timely manner and continuous. Miss-coordination between subcontractors and material suppliers (especially for long lead items) will lead to schedule and budget overruns. 5-17 Quality of work: Quality of work would reflect the reputation of the contractor and might either rank him on the top of contractors or force him out of the market. Generally, owners (government) strive to get a quality end product by their project and contractors try their best to deliver quality projects. However; poor workmanship that leads to demolition and rework will negatively impact the project budget and schedule. Also, interior quality of work will reflect the bad reputation of the contractor. Good quality and assurance programs will helps reduce the negative effects of this category. 6- Operation risks: Operation risk describes the category of risks faced the project during the guarantee period of the facilities, which starts after project completion continued for one year such as equipment breakdown or the discovery of defects in the work which may hinder the revenue generating capability. 6-1 Technical risks: The breakdown of equipment or failures of any part of the project which are common occurrences on any project, Usually, these will have repercussions on cost and time but effects are usually surmountable with today s technology. 6-2 Corruption risk: It the risk of occurrence of failure or breakdown in any part of the water treatment plant, e.g.(breakdown of the pipes, or failure of tanks in the system) during the guarantee period of the project. 6-4 Force majeure risk: Force majeure is the risk that a specified event entirely outside the control of either party will occur and will result in a delay or default by the contractor in the performance of its contractual obligations during the operation period. For example cyclone, earthquake, outbreak of war. Water treatment plant Water treatment plant is the most important facility in a water supply system to remove Contaminants in raw water, disinfect treated water, and produce drinkable water to consumers. However, hazards may be introduced during the process of treatment, or hazardous circumstances May allow contaminants to pass through treatment in significant concentrations. Constituents of drinkable water can be introduced through the treatment process, including chemical additives used in the treatment process or products in contact with water. Furthermore, suboptimal filtration following filter backwashing can lead to the introduction of pathogens into the distribution system. Meanwhile extreme natural hazards, willful human attacks, or interdependency failures (e.g., power failures) can all introduce risks in water treatment process. CONCLUSIONS: Based on the results analysis of the risks discussed in the previous, the following conclusions were reached: From the analysis of the six risk categories depended on the questionnaire received from five managers in the Arab company, our conclusions were as follow: * The most critical risks in the political risks were the: import export restriction failure to obtain approval, the lowest critical risks were: taxation risks. * The most critical risks in the financial risks were the: devaluation risks payment failure. the lowest critical risks: inflation risks. * The most critical risks in the development risks were the: bidding risks the lowest critical risks: force majeure risks. * The most critical risks in the site risks were the: differing site condition risks the lowest critical risks: site access risks. * The most critical risks in the construction risks were the cost overrun risks coordination between the subcontractor the lowest critical risks: force majeure some risks discussed in the matrix. * The most critical risks in the operation risks were the force majeure risks the lowest critical risks: technical risks. * At all the most critical risks category in the construction risks category. REFERENCES 1. Risk management of the BOT projects in Egypt. by Ibrahim Ahmed Ibrahim Hara Faculty of engineering at Cairo University. 2. http://www.google.com.eg/search?hl=arq=2ech10_riskbtnG=%D8%A8%D8%AD%D8%AB+Google%E2%80%8Fmeta=aq=f oq= 3. http://www.google.com.eg/search?hl=arq=LECTURE+11+RISK+MANAGEMENTbtnG=%D8%A8%D8%AD%D8%AB%21meta= 4. Hierarchical Risk Assessment of Water Supply Systems Huipeng Li Submitted for the Degree of Doctor of Philosophy from Loughborough University 5. ASSESSMENT OF RISK MANAGEMENT PERCEPTION AND PRACTICES OF CONSTRUCTION CONTRACTOR IN SAUDI ARABIA.BY ALI ABDULLAH AL SALMAN. APPENDIXES

Constitutional Convention :: essays research papers

During the Constitutional Convention, and the years to follow, the Anit-federalists heavily disputed with Federalist Party. One of the longest and most important arguments throughout this time period were the debates between Alexander Hamilton of the Federalists and Thomas Jefferson of the Anti-Federalists. The controversial issue discussed was over the establishment of a national bank.   Ã‚  Ã‚  Ã‚  Ã‚  Alexander Hamilton, at the time George Washington’s Secretary of Treasury, explained before the Congress that the U.S. Government’s need for a national bank was imperative for the survival of the nation. Hamilton stated that besides having â€Å"expressed† powers, it possesses â€Å"implied† powers designated into Constitution. Hamilton states in letter to Washington that â€Å"implied powers are to be equally delegated with expressed ones. Then it follows†¦.that the erection of a corporation[such as a bank] may well be implied†¦.it may as well be employed as an instrument†¦.of carrying into action any specific powers†¦.because the corporation has a natural relation to the government.† With saying this, Hamilton argues that a national bank in not unconstitutional because bank is a corporation which would regulate foreign trade, interstate commerce and government finances. One can use the implied power in this instance, because it is incident to a legislative power to regulate a thing, to employ all the means necessary is in fact legal.   Ã‚  Ã‚  Ã‚  Ã‚  Jefferson’s arguments provide a rationale for those who believed that states could overrule decisions of the federal government. The idea of a national bank would strip those rights of a states powers and this is what Jefferson argued. Jefferson believed strongly in the Articles of Confederation, and he was not willing to let go of its ideas, thus causing great tension between he and Alexander Hamilton. During his term of vice-presidency, Jefferson anonymously wrote the Kentucky Resolutions which expressed his views of politics. In here he states that â€Å"whenever a government assumes undelegated powers, its acts are unauthoritative, void, and of no force†¦.and that the co-States, recurring to their natural right in cases not made Federal, will concur in declaring these acts void and of no force†¦.

Monday, August 19, 2019

What does Bronte wish us to understand about early 19th century :: Essays Papers

What does Bronte wish us to understand about early 19th century society from our reading of the first ten chapters of Jane Eyre? In the early chapters, Bronte establishes the young Jane’s character through her confrontations with John and Mrs. Reed, in which Jane’s good-hearted but strong-willed determination and integrity become apparent. These chapters also establish the novel’s mood. Jane is an invented character but there was such a thing as mis-treated children. One type of abuse was the abuse directed to Jane by the Reed family. Jane’s’ aunt makes her life a misery. Jane is starved of love and affection. Mrs Reed finds fault with Jane because she wasn’t a content child. Jane says, â€Å" She really must exclude me from privileges intended only for contented, happy little children.† Mrs Reed gives an unbelievable amount of cruel treatment to Jane; for example, Mrs Reed has a new set of rules exclusively for Jane. John Reed is a child that behaves in an abusive way. No adult in the household stopped John’s behaviour. â€Å"He called his mother ‘old girl’†¦reviled her for her dark skin†¦ and he was still ‘her own darling’.† John vandalized the place; insulted and disrespected his mother despite this; he was still her own darling. John steps out of line, and is despicably behaved. â€Å"John Reed†¦large and stout for his age†¦with flabby cheeks. He ought to have been at school; but his mamma had taken him home for a month or two, ‘on account of his delicate health’.† This states that John is meant to be in school but his mother feels that his health is fragile, whereas he eats too much and doesn’t do enough exercise. Mrs Reed is unintentionally abusing her own children by over indulging them; this is another form of abuse. Mrs Reed’s children grow up unbalanced and we see towards the end of the book, that John commits suicide. Mrs Reed isn’t teaching her children how to differentiate between right and wrong. There is an extreme contrast between Jane and John’s abuse. Another aspect is that John abuses Jane physically. John attacks her, and for the first time she fights back scratching and crawling. The fact that Jane lashes out at John changes things, even though John attacks her first. The book that Jane chooses off the shelf is called ‘Bewicks History of British Birds’. She describes the books as, showing â€Å"death white realms†¦shadow. The words in these introductory pages†¦gave significance to the rock standing up alone in a sea billow of and spray; to the broken boat stranded on a desolate coast; to the cold and ghastly moon glancing through bars of cloud at a wreck just sinking.

Sunday, August 18, 2019

Eucharist History :: essays research papers fc

Eucharist History -reenacts the closing events of jesus' life -links past-present-future one ceremony -powerful, meaningful ritual -last of the 3 sacraments of initiation -prescribed by christ -have to see the eucharist as body, not bread Eucharist celebrates -"a way of remembering" -daily reminder of Gods love -jesus shared bread at last supper/do this in memory of me -a thanksgiving feast -"eucharist" means giving thanx Ritual Meal -earliest form of rituals are eating and gathering -sacrifice meal -ritual not a routine -builds on the symbolism of a ritual mean Sign and Symbols -symbol of gods love for us -jesus' body -last supper/banquet -welcome others to participate in the eucharist -unfilled celebration -if we went to mass on sunday, it would make the rest of the week more meaningful -unified body -it is the most commonly received sacrament, most pivotal of 7 -as a community, we celebrate the presence of christ in the eucharist -bread: basic food for most people/closely assoc with nature human work Vestements -white/purple/black robe Words -"Do this in Memory of Me." -"This is my body, which has been given up for you." ST. ROBERT'S CATHOLIC HIGH SCHOOL "THE EUCHARIST" BY: MARK HARNUM Presented to: Mr. DiMaio NRE 2A0-09 Monday November 29 , 1993 THE EUCHARIST Thesis: The Eucharist is a sign of Jesus' death, and how He gave himself up for us, and how we experience Him through His body. History of the Eucharist The Eucharist is a Jewish Ritual of worship. It dates back to the Last Supper, where Jesus celebrated a typical Jewish community meal with His friends. Sharing a meal with family, (very important to the Jews) also dates back to the Passover Meal. This is called the Liturgy of the Eucharist, and the early Christians added Jewish synagogue service and then became the Liturgy of the Word. The Eucharist is a sacrament, and is also a ritual. It is a repeated sacrament, and is the most frequently used among all sacraments. It is "a way of remembering" and a daily reminder if God's love. Jesus at the Last Supper shared bread with us, and said "Do this in Memory of Me." This is why we have bread, because it represents Jesus' body, and how He gave Himself up for us. The first little while of the Church, the "Mass was celebrated as a friendship meal called agape." Christians shared brought food to the house where they were assembled, but as the numbers increased, the meal was cut down to bread and wine. Today, the offertory collection echoes the early years of the spirit giving at the Eucharist. It is living bread that came down from heaven.

Saturday, August 17, 2019

C20th Century Drama English Coursework Essay

This particular play is ‘A view from a Bridge’ written by Arthur Miller. Arthur Miller was born on October 17th, 1915, in New York City. His parents were both Illegal Immigrants in the United States, which links to the background of the play. A view from the Bridge was first produced as a one-act play in verse 1955; Arthur divorces his wife to marry his co-star actress Marilyn Monroe Miller has now become America’s world’s popular playwrights. Most of his plays are about the society and the responsibilities of its relation. But also in all the plays they hide a deep considerate of how people act and behave with the situation of life around them. These obstacles they face which they have to successfully defeat over. ‘A view from a Bridge’ has its roots in the late 1940’s when Miller was interested in the work and lives of New York. Miller purposely wanted the play to be a modern version of a Greek Tragedy, which a main character is faced with trying, daring situations, which cannot be escaped from. In this play a tragic hero commits an offence unexpectedly. He then learns from his misdeed and therefore must die for his actions. Then as it is a Greek Mythology the God’s restores the Universe. In this play the â€Å"Hero† is inked onto a man named Eddie Carbone. He is uniquely and ordinary everyday man. Courteous, hard working and a man that people liked. This play is themed on the background of Italian origins, which relates to the dispute of Italians and Americans. This is introduced with Alifieri’s Speech; â€Å"This is Red Hook not Sicily†¦ now we are civilised, quite American. Now we settle for half†¦. In no longer keep a pistol in my filling cabinet† This reflects with the context of the play and links with the storyline. It also reflects on the reason of the main cause concluding to the violence. The story is also based on the ‘American Dream’ that any person can accomplish what and no matter what upbringing culture or race. He has added this, as in that period of time the American Dream was quite popular which was appropriate for it to relate the aspects of their life. Arthur Miller has produced the main character being the lead role of the play. Eddie Carbone is an Italian Longshoreman working on the New York docks. Eddie is a simple hard workingman who worked on the piers. When his wife’s cousins were sent, Marco and Rodolfo, he agrees to refuge them as illegal immigrants from Sicily. First signs of disturbance are when Catherine starts to show attraction to Rodolfo, at this Eddie disapproves. This is because of Eddies over protectiveness towards Catherine. His possessive behaviour towards Catherine brings him to envy towards Rodolfo. Out of anger and rage at the end Eddie reported them to the Immigration Beaureu. In response of ferocity Marco decides to kill Eddie, but Eddie kills himself with the knife. In one section of evidence, which relates to his own downfall is the possessiveness of Catherine. Catherine is Eddie’s orphaned Niece. In the first scene the audience is immediately given the information that Eddie has a peculiar concern towards his niece. He mentions and details out of her dress sense and suggest it is too short. The evidence showing that he is overprotective is when he indicates that she is walking â€Å"wavy†. â€Å"I don’t like the looks they’re givin’ you in the candy store†¦ the heads are turnin’ like windmills. † In this it is brought immediately to the audience attention of the over protectiveness for his own nice. His concern and obssesiveness of his actions may have a hidden feelings that Eddie has for Catherine. An uncertainty of more than relative love is present with the way he feels for Catherine. Toe Eddie Catherine represents to him as â€Å"just a baby† and therefore she â€Å"does not understand these things† but this is a cover up for his possessive behaviour. In Act 1 page6-10 I suggest his behaviour is both possessive and protective but more possessive. As the conversation of Beatrice, Eddie and Catherine it shows that Eddie treats Catherine like a child, and not the rightful age that she should be treated. The relationship between Eddie and Catherine changes with the arrival of Marco and Rodolfo. As they talk and get to known each other Catherine shows an interest to Rodolfo as she keeps gesturing to Beatrice â€Å"He’s a real blond† He then sings to her â€Å"Paper Doll†, but in a kindest way Eddie tells him to stop. Also that is when the changes of Eddie’s behaviour begin. He embarrasses Catherine by telling her to ‘go ahead’ meaning get out. Eddie again tries to humiliate Catherine so that Rodolfo will lose interest by telling him that â€Å"she wants to be an actress† meaning she’s a drama queen. But Rodolfo flirts back by saying

Friday, August 16, 2019

Identify potential weaknesses from either the Aircraft Solutions or Quality Web Design Company Essay

In this phase you will choose either Aircraft Solutions or Quality Web Design as the company you will work with. The scenarios are in Doc Sharing in the Course Project select area. You will then identify potential security weaknesses. Security weaknesses – You must choose two from the following three areas (hardware, software, and policy – excluding password policies) and identify an item that requires improved security. To define the asset or policy with sufficient detail to justify your assessment, your assessment must include: * the vulnerability associated with the asset or policy * the possible threats against the asset or policy * the likelihood that the threat will occur (risk) * the consequences to mission critical business processes should the threat occur * how the organization’s competitive edge will be affected should the threat occur To clarify an item that requires improved security, you must identify one of these items: * one hardware and one software weakness * one hardware and one policy weakness * one software and one policy weakness Other required elements include: * Cover sheet * APA-style * In-text citations and Reference section * Minimum length 3 pages, maximum length 5 pages (not counting cover sheet, diagram(s), references). Do not exceed the maximum length. Phase II: the Course Project (comprised of Phase I and II) – Recommend solutions to the potential weaknesses from either the Aircraft Solutions or Quality Web Design Company In this phase of the project you will include Part I (presumably improved as needed based upon Week 3 feedback) and then you will recommend solutions for the security weaknesses you identified in the Phase I. Definition of the solution – Hardware solutions must include vendor, major specifications with an emphasis on the security features, and location of placement with diagram. Software solutions must include vendor and major specifications, with an emphasis on security features. Policy solutions must include the complete portion of the policy that addresses the weakness identified. Any outsourced solution must include the above details and the critical elements of the service level agreement. Justification – You must address the efficacy of the solution in terms of the identified threats and vulnerabilities; the cost of the solution, including its purchase (if applicable); and its implementation, including training and maintenance. Impact on business processes – You must discuss any potential positive or negative effects of the solution on business processes and discuss the need for a trade-off between security and business requirements using quantitative rather than simply qualitative statements. Other required elements include: * Cover sheet * APA-style * In-text citations and Reference section * 5 reference minimum * Minimum length of solutions: 6 pages, maximum length 10 pages (not counting cover sheet, diagram(s), references). Do not exceed the maximum length P.S. Phase 1 is done and attached. Just need help with phase 2.

Thursday, August 15, 2019

s ‘Patriarchy’ a useful concept anymore?

My personal way of defining patriarchy is a society typically dominated and control by men. Patriarchy shows us how our society functions and how it controls women, including all systems, like work place, home, religion etc, where women are formed and developed to the way men want them to be. It is the opposite of matriarchy, meaning women are the head and in control of families. This quote given by H, Hartman signifies social patriarchy, so it is not naturally suggested but socially. ‘I define patriarchy as a set of social relations which has a material base and in which there are hierarchical relations between men, and solidarity among them, which enables them to control women. [p3, H Hartman: (1982), ‘What about women? ‘; ‘Gender Inequality in Employment', 551. 04 leatures 11 and 12. ] The way in which society used to be, was that once the content of ‘patriarchy' had been established, it was used strongly in every society and in many different ways, creating sexual politics, where men were seen as the dominant sex class and the treatment of women, through this patriarchy system determined their future and success in life. The possibilities for women making choices in every aspect of their own personal life were taken away from them or where very limited because of this patriarchal control that was upon them. In the past the husband was clearly the principal negotiator, with the marriage license being the only exception, where the women would really be going into a life long commitment of serving her husband as a slave. The females main source of learning were things such as learning to spin, sew and weave, and maybe a little reading and writing. The main company that was given to them, were other females, and they lived more or less behind closed doors. The women had a separate section in the house that was located away from the other sections so that communications with males or strangers were barred. While the men when out to work, the women's role was just seen as to be looking after the house and children, and listen to their husbands. ‘The separation of home from work led to a sharper separation of male and female spheres. The world of business outside the home became a male sphere and the world of home and children became a women's one. ‘ [p366, Fulcher & Scott. (1999) Sociology] The husband's leisure and business time were of no business to the wife, domesticity cut women off from business life and public activities in general. In some society's women were degraded, they were seen as objects used for male needs and a simple tool of breeding children. ‘A woman of a particular community, caste or social-economic stratum is raped to ‘teach' that section of the society, in other words, to reproduce the hierarchical structure. ‘[http:marxists. org/archive/marx/work/1884/orgin-family/ch02d. htm]. It was in the mid-1800 when the first signs of the feminist movement came about. In 1961 it was discussed by a man named John Stuart, that the role of women is society during that time, pointing out how the patriarchy placed such an intense limit on what women could do. A time came out when evidence should the existence of a pre-industrial division of labour between men and women. However this existence contained occupational segregation, where the females worked only in female jobs and males concentrated in male jobs. ‘Middleton (1979) argued that women did carry many different agricultural tasks, but it was the men who did the high status work of plouging. ‘ [p367 Fulcher & Scott. (1999) Sociology Family and Household] Job segregation enabled males still to maintain superiority over women, because of the patriarchal relationships in paid work. The labour market urged lower wages for women, so that it would encourage them to marry and stay financial dependant on their husbands. Women were excluded from better jobs than men, to keep their primary responsibilities as the main caregiver for children and family. However in some areas of the pre-industrial society capable women who entered the labour market were forced into part-time and insecure employments, where they would be excluded from promotion. Once they married they had to leave their job, so their personal status would drop back down into the status level as they were when they started off. Also the employment of women alarmed men highly as their position of the male role of head of the household became seen as threatened, especially in the twenty century then demands for labour by women became stronger, and women would no longer be ignored. This was when the ‘family wage' became known, when the male breadwinner would support his family with his earnings, whilst the women's earning were treated as a additional source of income so that their unpaid domestic work would not be interfered with their paid work. It was not until the 1980s that these requirements changed, when recruitment practices of certain companies had referred to the Equals Opportunities Commission. The position of men was altered and the women's position underwent significant changes. More women moved into the labour market and were used less in the homes. With the changing of attitudes towards means of the production, families began to drop away from the ways and ideas of ‘male ownership' with society and the changing attitudes of women's role became stronger. Society needed women to work as men could not fill all the vacancies and they needed women to do the jobs that men would not. More opportunities for young children to go to school were given. ‘Private housekeeping is transformed into a social industry. The care and education of the children became a public affair; society looks after all children alike, whether they are legitimate or not'. [p170, Jodi Dean. (1997) Feminism and the New Democracy] Changes in women's employment have had consequences that we still do not know what will happen in a situation involving children, marriages and other important factors in ones individual life. Countries that have high birth rates now have low birth rates, due to women working. Dramatic changes have also taken place, such as divorce rates rising and single mothers increasing. Organizations themselves are re-thinking employing different work time and working practice; because number of paid work and taking care of unpaid domestic and family work has increased as men have to also help now. Females that were before at home looking after husband's mother refuse to do this now. The late twenty century patterns was going to work, leaving work on the first child, then gradually coming back to work. These females were married, where as mentioned before that in the early days, that if women worked, they had to leave the employment completely when they got married. Now there are more women in the labour force than men. Women's economic behaviour is the same as men, but still do different jobs on a lower level. Patriarchy was also found in adopting the name of their husbands after marriage, but more women are choosing to keep their maiden and have a choice of titles e. g. Ms, Miss and Mrs, so that they can retain their own identity. Also another element that changed in society which is widely appreciated now is the fact that women were able to vote which began after the First World War, which was still based on age. However the question still remains that is patriarchy still useful? I would personally argue that yes it is. One has to understand it with other concepts, with the way of how the concept of patriarchy is used. I would personally argue that some concepts of patriarchy has fad away from today society's, but overall it has not lessened, but is now being used under different forms. One form of patriarchy that can be seen as a useful concept, is entertainment given by women. Women are appreciated on their glamour. In the media women such as the ‘Spice Girls' are a role model in society because of glamour. Naked women are commonly shown e. g. in the Sun Newspaper, on page three, where as men nudity is more under the covers. This is seen as useful, as it can be forfilling entertainment for men, and women' role models are being used to put across message, such as Spice Girls putting forward the message of ‘girl power'. It can also still be useful in a relationship as men still oppress women, maybe it is something that males inherent, that men can use to impress women, such as paying when going out, walking the lady home etc. I would say it's main usefulness still lies within the family, as the family and religion are the source of many of our beliefs. Families and religion can be the most powerful sets of shaping one's personality and future. This is important as it is given to us from our primary experiences of family life. It is believed that for a family to work it needs to be organized within a set of rules and belief's. These still mainly come from the main positional power, which is mainly the role of the father. The rules and beliefs are expected to be practiced in order to keep a family together. ‘The key to survival and success for the children in the family system, or the underlying incentives and rewards, is to please the father or, in it's modern form, please the parents, and obtaining their attention and/or approval. [http://www. 2. warwick. ac. uk/fac/soc/siology/researh. htm] In some religions and cultures it is seen as a useful concept, for example Islam, because some elements are practice to protects women and their dignity. Their rules come from the Holy Qur'an, which Muslims obey by not only because they have to, but also because they believe it has been given to them to help guide them and protect them from the dangers of life, one example, adultery. However some may not see it as useful, as facts have shown that the top politicians and scientists are men. Work hours still have had seen to be problems for women. In Britain inequality is illegal but still is happening in other parts of the country, and men still oppress women. Sometimes society promotes sex- stereotyped roles themselves when it is unnecessary, for example in some cultures there is more of a celebration when a baby boy is born, or when children are a bit older society places them into their sex roles, e. . to praise them we say things like â€Å"that's pretty for a good girl† or to a boy it is said † you do that like a girl†, or â€Å"boys don't cry†. We are teaching girls to be feminine, and boys are taught to be masculine, by being tough and insensitive. My conclusion to this essay from reviewing the facts I have gained, is that patriarchy is seen more as useful concept in society today despite the negative elements. I would personally say that women today still depend on certain patriarchal concepts to enable them to gain security within their lives, however this is not true for everyone. During this essay I have covered a range of topics to with patriarchy. In my essay I have concentrated on four aspects, I have defined the term ‘patriarchy'; I have talked about how society was how society has changed, and discussed if patriarchy still is a useful concept. I have produced this with relevant evidence in a form of quotes.